Putting into Operation
R&S
®
NGP800
14
Getting Started 5601.5603.02 ─ 05
Packing material
Retain the original packing material. If the instrument needs to be transpor-
ted or shipped later, you can use the material to protect the control ele-
ments and connectors.
Risk of damage during transportation and shipment
Insufficient protection against mechanical and electrostatic effects during
transportation and shipment can damage the instrument.
●
Always ensure that sufficient mechanical and electrostatic protections
are provided
●
When shipping an instrument, the original packaging should be used. If
you do not have the original packaging, use sufficient padding to pre-
vent the instrument from moving around inside the box. Pack the instru-
ment in antistatic wrap to protect it from electrostatic charging
●
Secure the instrument to prevent any movement and other mechanical
effects during transportation
Delivery package
The package contents contain the following items:
●
R&S
NGP800 power supply
●
Four power cables
●
Two 8-pin terminal block plug for output connections
●
Two 8-pin plug for analog Input and digital I/O port connections
●
One printed Getting Started manual
●
One document folder containing a Basic Safety Instructions guide, calibration
certificate, KC and CE certificate
3.4
Setting Up the Instrument
The R&S
NGP800 power supply series are designed for benchtop and rackmount
operation.
Setting Up the Instrument
