Instrument Tour
R&S
®
IQW
16
Getting Started 1178.6027.02 ─ 02
Display
The R&S IQW is equipped with a touchscreen display. It is also possible to con-
trol the instrument via mouse and/or keyboard. Both can be connected to the
USB connectors on the front panel.
Standby Key
The standby key connects/disconnects all internal modules of the I/Q Wideband
Recorder to/from the DC supply voltages generated by its internal power supply.
Power LEDs
The Power LEDs indicate whether the I/Q Wideband Recorder is ready to operate
(LED "PWR" lights green) or in standby state (LED "Standby" lights orange).
The LEDs do not light when the AC power switch on the rear panel is in position 0
(Off).
USB 2.0 Connectors (2x)
The two USB 2.0 ports (type A, master USB) can be used for connecting external
devices as keyboard, mouse or other devices. Additional USB 2.0 connectors are
located on the rear panel of the I/Q Wideband Recorder.
USB 3.0 Connector (1x)
The USB 3.0 port (type A, master USB) can be used for connecting external stor-
age devices or data sticks. Additional USB 3.0 connectors are located on the rear
panel of the I/Q Wideband Recorder.
The length of the connecting USB cables should not exceed 1 m. The maxi-
mum current per USB port is 500 mA. See also
Chapter 4.2, "EMI Suppres-
sion"
,
on page 10. To avoid disturbances, do not connect or disconnect
USB devices while data is being recorded or replayed.
Cartridge LEDs
The LED "State" is currently not used and always off. The LED "Act." indicates
the activity of the cartridge. It flashes, when the cartridge is in use (read/write
operations or at initialization at system start), otherwise it is off.
Front Panel Description
