Preparing for Use
R&S
®
IQW
13
Getting Started 1178.6027.02 ─ 02
Direct Ethernet connection
The LAN port of the R&S IQW is an auto-crossover Ethernet port. You can
connect it to a network that is equipped with Ethernet hardware (hub,
switch, router), but you can also setup a direct connection to a computer or
another test instrument. For both connection types, you can use either
crossover or standard straight-through Ethernet cables.
4.5
Replacing a Memory Pack
To replace a memory pack, following steps must be performed.
Risk of data loss
Switch off the R&S IQW, before removing the memory pack.
1. Unlock the key of the memory pack. It must be in vertical position.
Figure 4-1: Replace Memory Pack - Unlock Key
1 = Key in unlocked position
Replacing a Memory Pack
