Rohde & Schwarz HMP Series, Начало работы

Страница: 37 / 49

Trying out the instrument
R&S
®
HMP Series
37 Getting Started 1178.6791.02 ─ 03
The [Voltage] key and the arrow keys are lighting, indicating that they are
active. For information on the color coding, see
Chapter 7.2.2, "Characteristics
of setting controls" , on page 41.
2. Press the channel key, e.g. [Ch1].
Activates the voltage setting. The [Ch1] key lights blue.
3. Set the output voltage value by turning the [rotary knob].
The R&S HMP applies the setting immediately.
4. To terminate the setting, press the [Voltage] key.
The [Ch1 ]key illuminates green again.
Tip: If you do not terminate with the [Voltage] key, the instrument exits the set-
ting mode after the key fallback time has elapsed. See chapter "Instrument
functions > Basic functions > Key fallback time" in the user manual.
Setting the current limit
1. Press the [Current] key.
2. Press the [Ch1] key.
The current setting in the display is in edit mode.
3. Set the current limit value.
The R&S HMP applies the setting immediately.
4. Press the [Current] key to terminate the setting mode.
If you do not press the [Current] key, the instrument automatically exits the
setting mode after the key fallback time has elapsed.
See chapter "Instrument functions > Basic functions > Key fallback time" in
the user manual.
Activating the fuse
The R&S HMP series includes an electronic fuse function that enables you to pro-
tect a connected sensitive test circuit even better from damage.
1. Press the [Fuse] key.
The R&S HMP activates the fuse function.
2. Press the [Ch1] key to activate the fuse.
The R&S HMP immediately applies the setting and indicates the activated
fuse in the display.