Rohde & Schwarz EVSG-B1, Руководство пользователя

Страница: 219 / 418

Data Management
R&S
®
EVSG1000
219 User Manual 1178.6227.02 ─ 06
You can use the I/Q data to analyze the signal in external software, for example, or to
reproduce the signal on a signal generator.
8.2.3 Recording Settings
Access : "Config" >"Rec Config"
Access VNC : [s] > [F7]
(For numeric measurement modes only)
Recording GBAS/SCAT-I measurement results
In GBAS/SCAT-I mode, one record is stored for each slot, in a time interval of 62.5 ms,
as long as recording is active. Triggering is not supported. Recording is continued even
if the display update is temporarily stopped (by the "Pause" function).
Start and stop recording from any measurement view using the [Record] key.
Record the selected and currently displayed slot or frame only using the [Single] key.
The record contains measurement values and the message bitstream for the slot. All
records are stored in a CSV file. This basic CSV file contains a data link for each
record in the list. The link points to a further CSV file which contains all human-reada-
ble texts for that record. All data files for the current recording are stored in a subdirec-
tory that is exported together with the basic CSV file.
See also
"Recording GBAS data" on page 197.
List ...............................................................................................................................219
Clear List ..................................................................................................................... 219
Time ............................................................................................................................ 220
Data selection (Sel, not GBAS/SCAT-I mode) .............................................................220
Data selection (Select, GBAS/SCAT-I mode only) ...................................................... 220
└ Parameter ..................................................................................................... 220
└ Msg Log ........................................................................................................ 220
└ Graph Log .....................................................................................................221
└ Slot <x> Log ..................................................................................................221
Export List to USB .......................................................................................................221
Clear All Lists .............................................................................................................. 221
Rec IQ ......................................................................................................................... 221
List
Selects a specific data set list (1 to 999, the list number is shown in the softkey).
Remote command:
SETACTIVELIST
on page 377
GETACTIVELIST
on page 374
Clear List
Deletes all entries in the current list.
Remote command:
CLEARACTIVELIST
on page 373
Recording Measurement Data