manualshive.com logo in svg

Rohde & Schwarz ESRP, Начало работы

Поделиться
Скачать
Rohde & Schwarz ESRP Скачать руководство пользователя страница 87

Basic Measurement Examples

R&S

®

ESRP

87

Getting Started 1316.4697.02 ─ 07

7.1.2

 

Measuring the Signal Frequency Using the Frequency
Counter

The built-in frequency counter allows you to measure the frequency more accu-
rately than measuring it with the marker. The frequency sweep is stopped at the
marker, and the R&S

 

ESRP measures the frequency of the signal at the marker

position.

In the following example, the frequency of the generator at 128 MHz is shown by
using the marker.

Prerequisite

In this example, a precise frequency measurement is to be performed. Therefore,
connect the signal generator's "Ref OUT" connector to the analyzer's "Ref IN"
connector.

1. Set the signal analyzer to the default state by pressing the [PRESET] key.

The R&S

 

ESRP is set to its default state.

2. Select "Spectrum" mode.

3. Set the center frequency and the span.

a) Press the [FREQ] key and enter 128 MHz.

The center frequency of the R&S

 

ESRP is set to 128 MHz.

b) Press the [SPAN] key and enter 

1 MHz

.

The frequency span of the R&S

 

ESRP is set to 1 MHz.

4. In the "Setup" menu, select "Reference Ext".

5. Activate the marker by pressing the [MKR] key.

The marker is activated and set to the signal maximum. The level and the fre-
quency of the marker are displayed in the marker field (diagram header or
marker table).

6. Activate the frequency counter by pressing the "Sig Count On/Off" softkey in

the "MKR FUNC" menu.
The result of frequency counting is displayed in the selected resolution in the
marker field.

Measuring a Sinusoidal Signal

Содержание ESRP





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды