Rohde & Schwarz ESRP Series, Руководство пользователя

Страница: 962 / 1094

Remote Control
R&S
®
ESRP
959 User Manual 1175.7445.02 ─ 08
SYSTem:REVision:FACTory
Resets the response to the REV? query to the default value, e.g. after a user string
was defined using the
SYSTem:REVision[:STRing]
command. (REV? query availa-
ble for HP emulation only, see Chapter 11.18, "GPIB Commands of HP Models 856xE,
8566A/B, 8568A/B and 8594E" , on page 1007.)
Example: Define the system language:
SYST:LANG '8563E'
Set the response back to factory setting:
SYS:REV:FACT
Query the revision:
REV?
Response:
920528
Usage: Event
SCPI confirmed
Manual operation: See "REV String Factory" on page 488
SYSTem:REVision[:STRing] <Name>
Sets the response to the
REV?
queryto the defined string (HP emulation only, see
Chapter 11.18, "GPIB Commands of HP Models 856xE, 8566A/B, 8568A/B and
8594E"
, on page 1007).
Parameters:
<Name>
Example: Define the system language:
SYST:LANG '8563E'
Query the revision:
REV?
Response:
920528
Set the response to 'NewRevision':
SYST:REV:STR 'NewRevision'
Query the response:
SYST:REV:STR?
Response:
NewRevision
Manual operation: See "REV String User" on page 488
SYSTem:RSW <State>
Controls a repeated sweep of the E1 and MKPK HI/HL HP model commands (for
details on the commands refer to
Chapter 11.18, "GPIB Commands of HP Models
856xE, 8566A/B, 8568A/B and 8594E" , on page 1007). If the repeated sweep is OFF,
the marker is set without sweeping before.
Network Connection