Spectrum Measurements
R&S
®
ESRP
401
User Manual 1175.7445.02 ─ 08
To open the Lines menu
●
Press the [LINES] key.
The "Lines" menu and the "Select Limit Line" dialog box are displayed. For details on
the "Select Limit Line" dialog box refer to
Chapter 5.4.3.5, "Selecting a Limit Line"
Menu and softkey description
●
Chapter 5.4.3.1, "Softkeys of the Lines Menu"
Further information
●
Chapter 5.4.3.2, "Display Lines"
●
Chapter 5.4.3.3, "Limit Lines (Frequency/Time Lines)"
Tasks
●
Chapter 5.4.3.4, "Working with Lines"
●
Chapter 5.4.3.5, "Selecting a Limit Line"
●
Chapter 5.4.3.6, "Creating a New Limit Line"
●
Chapter 5.4.3.7, "Editing an Existing Limit Line"
●
Chapter 5.4.3.8, "Creating a New Limit Line Based upon an Existing Limit Line"
●
Chapter 5.4.3.9, "Activating/Deactivating a Limit Line"
6.4
Advanced Measurement Examples
This chapter explains how to operate the R&S
ESRP in spectrum mode using typical
measurements as examples. Additional background information on the settings is
given. For more detailed information on all available softkeys and the corresponding
instrument functions, see
Chapter 6, "Spectrum Measurements"
..................................................................................402
Measuring the Spectra of Complex Signals
..........................................................404
Measuring Signals in the Vicinity of Noise
............................................................ 407
............................................................................................ 412
Measurements on Modulated Signals
...................................................................419
6.4.1
Test Setup
All of the following examples are based on the standard settings of the R&S
ESRP.
These are set with the PRESET key. A complete listing of the standard settings can be
found in chapter "Instrument Functions", section "Initializing the Configuration – PRE-
SET Key".
Advanced Measurement Examples