Rohde & Schwarz ESRP Series, Руководство пользователя

Страница: 199 / 1094

Receiver Mode
R&S
®
ESRP
196 User Manual 1175.7445.02 ─ 08
5.4.3.9 Activating/Deactivating a Limit Line
Prerequisites:
The x- and y-units of limit line and current measurement setting have to be compatible.
For details refer to
Chapter 5.4.3.3, "Limit Lines (Frequency/Time Lines)" , on page 190.
The limit line has to consist of 2 or more data points.
1. In the "Select Limit Line" dialog box, select the limit line you want to activate/deacti-
vate. For details see also Chapter 5.4.3.5, "Selecting a Limit Line" , on page 191.
2. To activate or deactivate a limit line for a trace, press the "Select Traces to check"
on page 186 softkey and select or deselect the trace(s) to which this limit line
applies.
3. To deactivate the limit line for all traces, press the "Deselect All" on page 186 soft-
key.
Common Analysis Functions