Spectrum Measurements
R&S
®
ESRP
278
User Manual 1175.7445.02 ─ 08
By default, the frequency axis has linear scaling. Logarithmic scaling of the frequency
axis, however, is common for EMI measurements over large frequency ranges as it
enhances the resolution of the lower frequencies. On the other hand, high frequencies
get more crowded and become harder to distinguish.
Because it shows the lower frequencies more clearly, logarithmic scaling is used for
tests that focus on those frequencies, for example acoustic tests and measurements.
Remote command:
DISPlay[:WINDow<n>]:TRACe<t>:X:SPACing
LISN Control
Opens a dialog box to control a LISN.
The dialog box contains the following elements.
●
LISN
Selects the V-network that you have in use. The R&S
FSV-K54 supports the follow-
ing networks:
–
R&S ESH3-Z5 and R&S ENV216 (two-line networks)
–
R&S ESH-Z5, R&S ENV432 and R&S ENV4200 (four-line networks)
●
Phase
Selects the phase to be measured. Phase N and L1 are included in all four LISN.
Phase L2 and L3 are only included in four-line networks.
You can select one phase for a measurement only.
●
150 kHz HP
Turns on a 150
kHz highpass filter. The filter is available for the ENV 216 network
only.
Remote command:
LISN type:
Phase:
Highpass filter:
Peak Search
The reference section contains an overview of all functions that are part of the chapter
and lists the associated elements of the user interface.
Measurements
