Rohde & Schwarz AREG100A, Руководство пользователя, Страница: 271 / 321

Maintenance
R&S
®
AREG100A
271 User Manual 1178.7417.02 ─ 04
Settings:
Date .............................................................................................................................271
Time ............................................................................................................................ 271
Timezone .....................................................................................................................271
NTP Address ...............................................................................................................271
Use Time from NTP Server ......................................................................................... 271
Date
Displays the date set in the operating system in the format [dd.mm.yyyy].
Remote command:
:SYSTem:DATE
on page 237
Time
Displays the time set in the operating system in the format [hh.mm.ss].
The time setting corresponds to the selected Use Time from NTP Server .
Remote command:
:SYSTem:TIME
on page 238
Timezone
Selects the timezone.
You can select the timezone according to the major cities on the respective continents.
Note: By typing the first letter, you can quickly navigate through the lists to find the
desired destination.
Remote command:
:SYSTem:TIME:ZONE
on page 239
:SYSTem:TIME:ZONE:CATalog?
on page 239
NTP Address
Sets the IP address or host name of the NTP server.
NTP is a network time protocol used for synchronizing all participating devices in a
data network.
You can select a high-precision time server to reduce the impact of varying network
delays.
Remote command:
:SYSTem:NTP:HOSTname
on page 238
Use Time from NTP Server
Activates clock synchronization of the network via the NTP protocol.
Remote command:
:SYSTem:NTP:STATe
on page 238
10.3.2 Check Front Panel
Within this dialog, you can verify the functionality of the control keys.
Performing Maintenance Tasks