Instrument tour
R&S
®
RTO6
36
Getting Started 1801.6670.02 ─ 04
If a reference waveform is selected, the vertical rotary knobs are illuminated in
white or light gray (default colors), depending on the selected waveform.
[Gen]
Opens the "Waveform Generator" dialog, if option R&S
RTO6-B6 is installed.
The waveform generator can generate various function and arbitrary waveforms,
sweeps, and parallel patterns. For detailed specifications, refer to the data sheet.
[Logic]
Opens the "Logic" dialog to configure and enable the logic buses L1 to L4. A logic
bus (or parallel bus) has up to 16 logic (digital) channels. If logic buses are active,
pressing the key toggles these buses.
The key lights up if at least one logic bus is enabled.
[Bus]
Opens and closes the "Protocol" tab in the "Apps" dialog, where you can select
the required serial protocol and proceed to the protocol setup. The key lights up if
the decoding of a serial bus is active.
If serial buses are active, pressing the key toggles these buses when the "Apps"
dialog or the "Serial Bus" dialog is open.
[FFT]
Opens and closes the "Math" dialog with FFT settings. The key lights up if an FFT
is active.
[Math]
Opens the "Math" dialog, where you can configure the calculation of mathemati-
cal waveforms using various mathematic operations on other waveforms. Press
the key repeatedly to toggle the selected math waveform. If no math waveform is
active, the key closes the dialog.
If a math waveform is selected, the vertical rotary knobs are illuminated in light
brown (default color), the brightness of the color depends on the selected wave-
form.
[Position]
The vertical [Position] knob changes the vertical offset or the position of the
selected waveform. The horizontal axis and the selected waveform are moved
vertically. You can select whether the knob changes the offset or the position in
the "Menu" > "Settings" > "Frontpanel" > "Knobs" dialog.
Keys and controls
