manualshive.com logo in svg

Rohde & Schwarz 1322.8003K06, Начало работы

Поделиться
Скачать
Rohde & Schwarz 1322.8003K06 Скачать руководство пользователя страница 25

Preparing for Use

R&S

®

FSPN

25

Getting Started 1179.4370.02 ─ 01

To suppress electromagnetic radiation during operation:

●

Use high-quality shielded cables, for example, double-shielded RF and LAN
cables.

●

Always terminate open cable ends.

●

Ensure that connected external devices comply with EMC regulations.

Preventing electrostatic discharge (ESD)

Electrostatic discharge is most likely to occur when you connect or disconnect a
DUT.

►

NOTICE! 

Risk of electrostatic discharge. Electrostatic discharge can damage

the electronic components of the product and the device under test (DUT).
Ground yourself to prevent electrostatic discharge damage:
a) Use a wrist strap and cord to connect yourself to ground.
b) Use a conductive floor mat and heel strap combination.

Signal input and output levels

Information on signal levels is provided in the data sheet. Keep the signal levels
within the specified ranges to avoid damage to the R&S

 

FSPN and connected

devices.

Considerations for Test Setup

Содержание 1322.8003K06






















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды