manualshive.com logo in svg

Rohde & Schwarz 1322.8003K06, Начало работы

Поделиться
Скачать
Rohde & Schwarz 1322.8003K06 Скачать руководство пользователя страница 23

Preparing for Use

R&S

®

FSPN

23

Getting Started 1179.4370.02 ─ 01

Switching users when using the auto-login function

Which user account is used is defined during login. If auto-login is active, the
login window is not displayed. However, you can switch the user account to be
used even when the auto-login function is active.

1. Select the "Windows" icon in the toolbar to access the operating system of the

R&S

 

FSPN (see also 

"To access the "Start" menu"

 

on page 21).

2. Press [CTRL] + [ALT] + [DEL], then select "Sign out".

The "Login" dialog box is displayed, in which you can enter the different user
account name and password.

For information on deactivating and reactivating the auto-login function, see the
R&S

 

FSPN user manual.

3.12

 

Checking the Supplied Options

The instrument can be equipped with both hardware and firmware options. To
check whether the installed options correspond to the options indicated on the
delivery note, proceed as follows.

1. Press the [SETUP] key.

2. Press the "System Config" softkey.

3. Switch to the "Ve Options" tab in the "System Configuration" dialog

box.
A list with hardware and firmware information is displayed.

4. Check the availability of the hardware options as indicated in the delivery

note.

Checking the Supplied Options

Содержание 1322.8003K06






















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды