Rogers LED Light Bulb, Руководство по установке

Страница: 15 / 17

Your installation is done!
Your LED Light Bulb is now part of your Smart Home Monitoring system. Now
you can control your lights remotely with your Touchpad, your smartphone app
and through the Web Control Centre.
Start using this device:
Use your smartphone app or visit the Web Control Centre at smarthome.rogers.com to:
· Dim or turn the lights on or off remotely.
· Create a custom lighting and dimming schedule to save energy and money.
· Learn more about the features of your Smart Home Monitoring system.
How to reset this device:
If you are trying to add an LED Light Bulb to your system and are unable to pair it in the first few
attempts, or if you see an error while pairing, try the following steps to reset the LED Light Bulb
and then pair again.
1. Turn the LED Light Bulb off and on ten times. Start in an off position.
2. The LED Light Bulb will blink 5 times to indicate success.
3. Now, try the pairing process again following the instructions in the Pairing the LED
Light Bulb section.
15 Smart Home Monitoring | LED Light Bulb | Touchpad Set-Up