Rogers 411301, Руководство пользователя, Страница: 9 / 11

9
Attaching your wheel kit Attaching your wheel kit Attaching your wheel kit Attaching your wheel kit
Using your wheel kit Using your wheel kit Using your wheel kit Using your wheel kit
To raise wheel kit remove pin from lower hole and rise when wheel kit is fully raised insert pin in
upper hole
To lower wheel kit remove pin from upper hole and lower when wheel kit is fully lowered insert
pin in to lower hole
Upper hole
Lower hole
Attach wheel kit to center of link tube
Insert 4 bolts into holes on bottom plate
then put them thought top plate and
tighten on 4 5/8 nuts
Longer side goes on same side where
pads attach
Use 2 kits for 2 or 3-man sleds, 3 kits for 4-man, 4 kits for 5-man, 5 kits for 6-man, 6 kits for
7-man.
Bottom plate
Link tube