PATROL II LCD User's Manual Rev.D
2011-04-01
Page
22
of
25
R
EADER
’
S USING CONDITIONS
PATROL II LCD reader is designed to work in a wide range of external temperatures ranging from -
25° to +60°C and humidity up to 95% however it must be protected from direct influence of fluids
(cannot be submerged or left on the rain). If a reader is used in a lather case it can be used for
short time during intensive showers however the time when reader is exposed to such conditions
should be reduced to a minimum required to read checkpoint or card. After reading device should
be put to a pocket or another protected place. Also, when used in the leather case, PATROL II LCD
withstands free falling from the 1.5m height to a hard surface (e.g. concrete) however it should not
be intentionally exposed to such event.
Note: PATROL II LCD should be used in a lather case which on one hand safeguards it against
getting wet, and on the other hand protects from mechanical damage in case it falls onto a hard
surface.
A
NTI
-
SABOTAGE PROTECTION
Reader is equipped with special components and circuits dedicated for protection and detection of
sabotage acts, in particular exposing to microwave radiation (microwave oven) as well as using
high voltage (e.g. 230V AC). In case the Roger’s technical personnel detects that such situations
occurred, reader loses its warranty coverage and can be repaired out of warranty, against payment
only. However some kinds of extensive damages to the electronic module exclude possibility to
repair, about what the device’s owner is individually notified.
F
ACTORY KIT
The factory kit includes:
Patrol II LCD handheld reader
two batteries NiMh/2100 mAh
USB cable
AC charger
leather case
user’s manual
PK-3 checkpoint (1 pc)
PK-2 checkpoints (5 pc)
proximity ISO card thin (3 pc)
horizontal card punch (etui) for ISO card (3 pc)
managing program
Patrol Master available for download from
USB drivers available for download from
