Roger GPSR-BP, Как пользоваться инструкцией

Страница: 8 / 16

Installation
When installing the GPS repeater, you should have:
•
a suitable tools to tighten the SMA connector
• handheld GPS receiver (*)
• Suitable fixing tools and accessories
(*The GPS receiver must be able to show the satellite signal levels.)
Fast instructions
1. Open the ROGER GPS Repeater Pack.
2. Use the black mount to connect cable with TNC male connector.
3. Mount the external antenna on the roof of the building and connect the cable
(RG58), supplied with the kit, to the antenna and to the repeater installed indoors.
4. Install the GPS repeater transmitter by fixing it to ceiling, wall or a suitable
mount.
5. After having installed the outside antenna, cable and repeater, plug in the
wall adapter cable and plug the adapter to a power outlet.
6. The LED of the repeater should flash a few times at startup and then turn
constant red or green. Adjust the repeater’s transmission power according to the local
conditions, to prevent a signal loopback, and indoor GPS coverage is immediately
available.
1.
2.
3.
4.
5.
6.
8.