Version 2.0
Copyright Roger™
-GPS
2019 10 01
9
Extending the
ROGER™
repeater’s distance
from the outdoor antenna.
ROGER™
GNSS Amplifier (GNSS-A)
ROGER™ G
NSS Line Amplifier is used to allow
longer cable runs and/or signal splitting to several
GNSS Repeaters.
It has a gain of +16dB and it includes a filter to
remove unwanted signals that may have entered
the cable at some point. Amplifier is powered
through the output signal cable by the
ROGER™
GNSS Repeater and it passes on DC power for the
GNSS receiving antenna or another GNSS line
amplifier.
Extending the number of repeaters by
adding a Splitter 1 to 5.
ROGER™
GNSS Splitter 1 to 5 (GNSS-S)
With the ROGER™ G
NSS Signal Splitter, the signal
from one external antenna can be redistributed
to up to five repeater units.
It is advisable to use a separate amplifier with the
signal splitter to ensure adequate transmission
power to all the five repeaters. If the signal is to
be transmitted to fewer than five repeaters, the
unused ports must be terminated with a 50ohm
termination. The splitter is powered through the
output signal cable by the
ROGER™
GNSS
Repeater and it passes on DC power for the GNSS
receiving antenna or GNSS line amplifier.
