Roger Technology B70/1B, Инструкции и предупреждения для установщика

Страница: 46 / 140

EN
46
Enable safeguarded door closure/opening
)REFPMRKXLMWTEVEQIXIVIRWYVIWXLEXXLIHSSVMWRSXPIJXSTIRHYIXSERMRGSVVIGXERHSVEGGMHIRXEP
command.
This function is
238
enabled if:
• the door receives a STOP command;
• the sensing edge is activated;
•
XLIHSSVMWGSQTPIXIP]STIRHYIXSTEVEQIXIVW $
and ).
•
XLIEGUYMVIHTSWMXMSRMWPSWXTIVJSVQTSWMXMSRVIGSZIV]WIIGLETXIV
Disabled. The parameter is not displayed.
)REFPIH
After a period of time set with parameter
XLIGSRXVSPYRMXWMKREPWEWIGSRH[EVRMRK[MXLXLIƽEWL
ing light, regardless of the parameter
$
, and then closes the door.
)REFPIH
If the door is closed as a result of a step mode command, after a period of time set with parameter ,
XLIGSRXVSPYRMXWMKREPWEWIGSRH[EVRMRK[MXLXLIƽEWLMRKPMKLXVIKEVHPIWWSJXLITEVEQIXIV $
), and
then the door closes.
If the door is stopped by the obstacle detection system during a closure manoeuvre, the door closes
after a period of time set with parameter .
If the door is stopped by the obstacle detection system during an opening manoeuvre, the door closes
after a period of time set with parameter .
If the control unit detects a collision occurring in the same position 5 consecutive times, the function is disabled and the motor is set
to safety mode. The door will then complete the manoeuvre only when a command is received.
-JXLIGSRXVSPYRMXHIXIGXWQSVIXLERGSPPMWMSRWHYVMRKSTIRMRKERHSVGPSWYVI[MXLMRERQMRYXITIVMSHXLIJYRGXMSRMWHMWEFPIHERH
the motor is set to safety mode. The door will then complete the manoeuvre only when a command is received.
Setting safeguarded closure/opening activation time
;EMXXMQIWIXXEFPIJVSQXSW
;EMXXMQIWIXXEFPIJVSQXSQMR
Restoring factory default values
NOTE
8LMWTVSGIHYVIMWSRP]TSWWMFPIMW23HEXETVSXIGXMSRTEWW[SVHMWWIX
P1
P2
x4 s
+
-
Warning! Restoring default settings cancels all settings
made previously: after restore, check that all parame
ters are suitable for the installation.
The default factory settings may also be restored using
XLI4097ERHSV0)77FYXXSRWEWJSPPS[W
• Turn off the power.
•
4VIWWERHLSPHXLI4097ERH0)77FYXXSRYRXMPXLIYRMXW[MXGLIWSR
• The display flashes after 4 s
U(V
.
• The default factory settings have now been restored.
-HIRXMƼGEXMSRRYQFIV
8LIMHIRXMƼGEXMSRRYQFIVGSRWMWXWSJXLIZEPYIWSJXLITEVEQIXIVWJVSQ Q
to
Q
.
N.B. : The values shown in the table are indicative only.
Q
HW version.
)\EQTPI
Q
Year of manufacture.
Q
Week of manufacture.
Q
Serial number.
Q
Q
Q
FW version.