Rodgers Theatre 360, Руководство пользователя

Страница: 14 / 75

9
2. Press and hold the SET piston, and press the MASTER/CRESCENDO
EXPRESSION tab again. The tab light flashes, and the Console Display reads:
C R E S C S E T M O D E
S T D S T A G E 1
The stops and couplers currently set on stage one of the 63 stages in the Crescendo
sequence turns on.
3. The current sequence may be viewed by advancing through the stages one at a time
using the Alpha Dial. At each stage, the stage number (1 to 63) is indicated in the
Console Display, and the stops and couplers set at this stage turn on.
4. To add one or more stops to the sequence, go to the stage where the stop(s) is to be
added, turn on the stop(s), and press SET.
5. To delete a stop(s), go to the first stage in which the stop(s) turns on, turn off the
stop(s), and press SET.
6. Each stop can be turned on at any stage and turned off at any later stage. As an
example, assume the GREAT 8' VIOL CELESTE II is to turn on at stage 1 and off
at stage 25. Go to stage 1, turn on the GREAT 8' VIOL CELESTE II, and press
SET. Then go to stage 25, turn off the GREAT 8' VIOL CELESTE II, and press
SET.
7. To clear the entire Crescendo sequence (stages 1 through 63), hold SET and press
General Cancel (0). This also resets the current stage number to 1 so that a new
sequence can be entered.
8. When building a completely new sequence, it is advisable to first write the
sequence down, then assign stage numbers from 1 to 63 to each stop or group of
stops in the sequence. Sometimes there are more stages than stops in the sequence,
so it is necessary to skip some stages to make the sequence end at or near stage 63.
If this is not done, the sequence ends before the Crescendo Pedal is fully
depressed.
9. To exit the “CRESC SET MODE” menu at any time, press General Cancel. Any
changes in the sequence made up to this point are saved.

LOCKING THE CRESCENDO:
1. Press and hold MASTER EXPRESSION/CRESCENDO for approximately five
seconds until “CRESCENDO LOCKED” appears in the Console Display.
2. While continuing to hold MASTER EXPRESSION/CRESCENDO, rotate the
Alpha Dial either direction until the Console Display reads “CRESCENDO
UNLOCKED.”
3. Release the MASTER EXPRESSION/CRESCENDO. The Crescendo is unlocked.