20
2. INPUTS – OUTPUTS – CONTROLS
2.1 MODEL RN-1600
1. RCA line outputs
(CH L + CH R; left and right channels).
Line outputs to pass-thru the input signal to another amp
2. RCA line inputs
(CH L + CH R; left and right channels).
Line inputs for connection of the amp to the RCA line-
outs of the head unit
3. Input gain control
. LEVEL adjustment for channels CH
L + CH R. Used to match the RCA line output voltage of
the head unit to the amplifier input section
4. Bass EQ control
. Bass emphasis adjustment with a
center frequency of 45 Hz from 0 dB to 10 dB
5. Subsonic high pass crossover frequency control
, to
adjust the subsonic cut-in frequency of the channels CH
R + CH L
6. Low pass crossover frequency control
, to adjust the
cut-off frequency of the channels CH L + CH R
7. Remote port
. To connect the cable of the bass level
remote control to the amplifier
8. Molded terminal
for the connection of two subwoofers –
“+” and “-” are connected in parallel, allowing to connect
two speaker wires whenever two subs are present
9. Maxi fuse
to protect the power supply of the amplifier
from damage
10. “+12V”
for connection to the positive terminal of car
battery
11. “REM”
for the automatic (remote) turn-on / turn-off of
the power amplifier from the head unit's amplifier remote
wire
12. “GND”
for connection to chassis ground or negative
terminal of car battery
NC-Amp 1-2-4-5-CH ME_pfade.indd 20
09.05.2009 11:25:33 Uhr
