13
Backpanel with connectors
B
A
H
I
J
K
C
D
E
O
P
F
G
R
M
L
S
N
Q
P S
E
www.rodec.com
www.rodec.com
www.rodec.com
www.rodec.com
RODEC
Made in
Belgium
Professional
Audio
Equipment
WARNING
POWERCORD
DISCONNECT
BEFORE OPENING
A)
Power switch
Controls the supply of AC power to the set. A single push turns on the mixing panel, a second
push turns it off.
Attention!
By turning off this switch, the mixing panel is in stand-by mode. At that moment
the mixing panel will still consume electricity from the mains net. The power
cord has to be unplugged from the power inlet to shut down all power.
B)
Power inlet
Universal mains power inlet.
C)
DJ microphone input
Balanced microphone input with a sensitivity of 4.2mV, with XLR-JACK combination connector.
D)
Effects IN/OUT
Input and output to connect effect equipment to the microphone channel. If there is no plug in
the JACK connector, the microphone channel works normally, if there is a plug inserted in the
JACK, the internal link is interrupted. The sensitivity of this IN/OUT connection is 775mV.
E)
Ground-terminal
Terminal to connect the ground wire of the vinyl turntable.
F)
Micro input
Balanced microphone input. To obtain good signal quality, you have to use a microphone with
balanced output. The use of a microphone without balanced output is also possible.
G)
PHONO input
Phono input with a sensitivity of 5.2mV and built in RIAA correction.