RODE Microphones Pinmic, Инструкция по эксплуатации

Страница: 16 / 20

I N C LU D E D ACC E S S O R I E S
- 16 -
C U S T O M I S I N G T H E S I LV E R M E S H H E A D
The supplementary silver mesh head can be custom painted
to match the colour of the user’s clothing, providing an even
higher level of microphone camouflage.
To colour your mesh, first use a pair of tweezers to remove
the inner foam (pop filter) from just under the mesh head.
(This foam reduces wind noise and moisture reaching the
microphone capsule, and must not be exposed to paint.)
Once the foam is removed, use a spray paint in the colour
of your choice to paint the mesh. Spray from a distance,
applying a thin, even coat over the surface.
Allow the mesh to dry completely before its next usage.
Once dry, return the inner foam to its place inside the mesh.
Follow the instructions on pages 14-15 to switch the mesh
heads on the PinMic™.
Always keep your unused mesh head in the provided
storage case for complete protection.
Note: When colouring, please be cautious not to block any of the
holes in the mesh head. This may reduce the acoustic transparency of
the
PinMic ™, resulting in compromised audio quality.
To check that the mesh head is clear, hold it up against a light and
ensure the light filters through the holes.
122-950-1-3_PinMic_manual_newspec.indd 16 122-950-1-3_PinMic_manual_newspec.indd 16 1/27/2011 3:14:24 PM 1/27/2011 3:14:24 PM