RODE Microphones Pinmic, Инструкция по эксплуатации

Страница: 15 / 20

- 15 -
Once the microphone capsule is loose, remove it from the
mesh. Remove the black mesh head from the socket, using
the groove on the mesh ring as grip. Next, insert the silver
mesh head into the socket. Place the microphone capsule
into the silver mesh and tighten on securely with the driver.
Note: Please do not attempt to screw the mesh head onto the
PinMic™ by tightening while the microphone is attached to the
backplate. This may cause damage to the backplate pins. Always
remove your microphone from clothing and backplate before
changing mesh heads.
I N C LU D E D ACC E S S O R I E S
- 15 -
Use the groove across the bottom of the mic to unscrew
Place the silver mesh in the socket, then the mic capsule, then tighten
SUPPLEMENTARY
SILVER MESH
PinMic™
CAPSULE
SOCKET
HOLE
122-950-1-3_PinMic_manual_newspec.indd 15 122-950-1-3_PinMic_manual_newspec.indd 15 1/27/2011 3:14:23 PM 1/27/2011 3:14:23 PM