background image

10

11

General operation

The gold dot on the face of the 
NT-USB indicates the front of the 
microphone, and the pickup area 
of the capsule. The microphone 
(and gold dot) should always be 
facing towards the sound source 
that you wish to record. 

On the side of the NT-USB there 
are two adjustment knobs.

Diagram 3 - Monitor mix control 
and headphone volume control 

Monitor mix control 

The Monitor mix control (the top knob) is used to ‘mix’ between the direct 

microphone signal (your voice for example) and the sound from your audio 

recording software on your computer / device (the music that you are singing 

along to). By turning the knob counter-clockwise, you will hear more of the 

direct microphone signal, and less of the signal coming from the computer 

/ device software. If you turn the knob clockwise, you will hear more of the 

computer/device signal, and less of the direct microphone signal.

We recommend always beginning with the knob in the centre position. This 

will ensure that you are hearing an equal balance of both the direct signal, 

and the computer / device signal, enabling you to then achieve an ideal 

balance between the signals.

Headphone volume control

The headphone volume control (the bottom knob) allows you to control the 

volume of the playback through headphones connected to the NT-USB via the 

headphone jack.

Содержание NT-USB














Отзывы: