RESET THE USER PASSWORD
This mode allows the administrator to reset a locked-out user. The admin password MUST be
correctly presented in order for this process to take place. To reset a locked-out user, follow
these steps:
1.
Power up X5 by connecting to the host via USB or FireWire. Ensure the STATUS LED blinks
once.
2.
Press the
Admin
button, followed by the
‘0’
button.
3.
Press
Enter
. The Status LED will blink three times.
4.
Enter the
8-digit admin password
and press
Enter
. The Status LED blinks twice to notify that
you may reset the user password.
5.
Enter the
user ID
together with the
desired user password
and press
Enter
. The Status LED
blinks twice to notify that you may press the confirmed new password.
Example –
1
87654321 ->
Enter
6.
Enter the
new confirmed user password
and press
Enter
.
Upon a successful password reset, the Status LED will blink three times and there will be two
‘beep’ sounds. If not, the Error LED will blink continuously.
Note:
•
Resetting the password of user ID 1 does NOT reset the password of user ID 2 and 3.
Likewise for all other user IDs.
•
If the Admin password is lost / forgotten, there are no other ways to reset
Amphibious X5.
You lose / forget your admin (administration) passwords (and/or three user
passwords) you lose your data.
ROCSECURE
|
AMPHIBIOUS X5 user manual
Page | 24