Rocstor GUARDIAN 4RT, Руководство по установке и настройке

Страница: 41 / 124

ROCSECURE – Guardian 4RT Secure Raid System User Manual Page | 41
Configuration Procedures
Below are a few practical examples of concrete configuration procedures.
Quick Create Function
The number of physical drives in the G u a r d i a n 4 R T determines the RAID levels that can be
implemented within the R aid S et. You can create a R aid S et associated with exactly one
Volume Set. The user can change the RAID level, Capacity, Volume Initialization Mode and Stripe
Size. A hot spare option is also created depending upon the existing configuration. Click on
Confirm
the Operation
and click on
Submit
button in the Quick Create Function screen, the Raid Set and
Volume Set will start to initialize.
If the Volume Set size is over 2TB, an option “Greater Two TB Volume Support” will be
automatically provided in the screen as shown in the above example. There are two option to
select: “No” and “Yes.”
Greater Two TB Volume Support:
No
: Volume Set capacity is set to maximum 2TB.
Yes : Volume Set capacity can be set over 2TB.
NOTE: In Quick Create Function, the Raid Set is automatically configured based
on the number of disks in your system. Use the Raid Set Function and Volume Set
Function if you prefer to customize your Raid Set and Volume Set.
NOTE: When Quick Create Function is used, the Volume Set will be mapped by
default to two host channels “SATA&USB.” After the initialization is done, you can
use the Volume Set Function to modify the host channel mapping to “SATA”.