Rocom MD PBX KEY CW AV, Руководство пользователя

Страница: 4 / 24

User guide MD PBX KEY CW Issue 1.00
Page 4
code". Up to ten different codes, for each contact, can be programmed with lenghts
between 3 and 6 digits. The activation time of a contact can be programmed (from 0 to
99 seconds). The second contact (optional) can also be programmed for an automatic
activation. In this case the contact will be activated for the programmed time with every
line seizure (i.e. to activated lights or videocameras). Also the function with an ON/OFF
mode is programmable for the second contact. In this case every time a code is inserted
for this contact it will switch between ON and OFF (i.e. to activated special appliances,
lights or alarm systems). After the input of a wrong code the unit will drop and size the
line again. The time between the possible input of a code will also increase from 5 to 45
seconds. To reset the unit the input of a right code is required.
Features
- Up to 99 speed dial calls programmable (01 to 99)
- Programmation using DTMF tones
- Programmable contact activation time
- Auto answer function
- High quality handsfree speech controlled unit
- Digital tone detection
- Volume regulation for loudspeaker and microphone
- With DTMF dial controlled door opener contact
- Optional external second relais for the comand of videocameras or a similar devices
- Line disconnect with DTMF dial
- Automatic line disconnect after door opening
- Connection to any PABX T/R analogue extension line
- Programmable DTMF or rotary dial
- Programmable time out timer
- Setable hardware timer
- Data storing on EEPROM
- Access code for activation of both door opener contacts (second contact is optional)
- Up to 10 differnet code for each contact programmable
- 3 to 6 digits long code programmable
- Programmable automatic activation of the second contact (optional) with line seizure
- Programmable ON/OF mode for the second contact (optional)
- Increasing line seizure time between codes input with wrong code entry