Quick user guide
Helpy GSM
Issue 1.00
Page 11
Programming
Programming can be done using a standard analogue phone with DMTF dial, or
using SMS, an USB cable conneted to a PC or using a SD card. For the programming
using SMS, PC and SD card a programming tool ("Estant") ist available (www.rocom-
gmbh.de for the download).
PLEASE NOTE!
During a programming sequence no more then 10 seconds waiting time betw-
wen two digits are allowed. After this time you get a warn tone and you must
hang up.
This quick guide is only a short description of the most important programma-
tions. The complete overview can only be found in the Estant programming
tool.
Enabling programming mode
To enable the programming mode using a DTMF phone please dial:
DTMF
*
<password (default "0")>
#
DTMF example (default)
*0#
PLEASE NOTE!
If programming mode is active no outside calls will be answered
Disabling programming mode
To deactivate the programming mode:
DTMF
*
<password (default "0")>
#
DTMF example (default)
*0#
PLEASE NOTE!
With the same procedure also an activ alarm can be cancelled.
