LED DISPLAY OPERATION
The LED of the Head Set displays all of the different radar and laser
alerts.
- On Standby: LED is OFF
- K band, Ka band and Laser alert: LED blinking
- Radar Signal Strength Level 1: blinking slow
- Radar Signal Strength Level 2: blinking fast
- Radar Signal Strength Level 3: blinking faster than level 2
- Head Set Low Battery Alarm: LED quickly blinks 5 times every 20
minutes
- Head Set Auto Power Off Alarm: LED blinks once per second for 10
seconds
- Head Set Battery Charge Mode: LED On while battery charging and
LED off when completed.
PREAMBLE OPERATION
In preamble mode the LED will be on for 3 seconds with one beep alert
when you turn on the power. If the Volume Up or Down button is
pressed, the unit will exit preamble operation.
POWER BUTTON
Press power button to turn on the power. LED will stay on for 3 seconds
with one beep when power on. You get one long beep when head set is
connected with the radar. Press and hold power button for two seconds
to turn off the power. The head set will give power off beep with led
blinking. It gives a 2 beeps alerts every 10 seconds when disconnected.
VOLUME UP BUTTON
Press Volume up button to increase it from level 1 to level 5. Volume
level 1 and 5 give one long beep and levels 2-3-4 give one short beep.
Factory Default is level 3.