CONNECTING TO POWER SUPPLY
Connect the Radar Detector power cable to any power source that has
12V and is powered with the ignition. Example: ignition fuse or main
power fuse.
DO NOT
connect directly to battery.
The wire with both red and black is positive.
The solid black wire is ground.
Press the POWER button on the wireless Head Set. Communication
between radar and Helmet device will be automatically connected, as
long as the detector is powered on by motorcycle.
Keep all cables away from moving parts and hot surfaces (motor, tires,
muffler, etc.).
Make sure the wires are fastened securely with provided cable ties to
avoid accidental damage to the wire.
Extra wire should be fastened securely and placed out of the way.
Note:
The Radar Detector may not power on if engine is not running.
Note:
DO NOT
drill holes in the Radar Detector itself and always
thoroughly
inspect the location before drilling any holes.
We do not
recommend installing the unit with locking tape although
sometimes it is used.
Warning: The flashing LED in the Head Set can be
extremely bright, especially at night time. It can be
distracting and dangerous if you are not familiar with the
brightness level. Before riding with the Visual Alert,
especially at night, take the time to familiarize yourself
with the system in a safe, controlled setting.