2
Eastwood Technical Assistance: 800.343.9353 >> [email protected]
The
ROCKWOOD 6” DUAL-ACTION “D/A” AIR SANDER
is a heavy-duty professional quality tool
ruggedly designed for many years of reliable service. It features a high-efficiency, ball bearing motor
and eccentric drive assembly for smooth operation and long life. Speed is easily controlled with an
infinitely progressive throttled speed control and built-in speed regulator knob. A lockable output shaft
feature allows direct orbital rotation or random orbital action.
CONTENTS
(1)
Dual-Action Air Sander
(1)
6” PSA Pad
(1)
1/4” NPT Air Inlet Coupling
REQUIRED FOR USE
• The inlet air supply should have a moisture separator capable of removing all moisture and
impurities from the air supply. Moisture and/or oil in the air supply will cause poor tool
performance and damage.
• A suitable regulator must be used to limit incoming air pressure to 90 PSI maximum.
Excessive air pressure can cause permanent damage to the unit and possible serious
personal injury from bursting.
• For best results, a compressor capable of providing a minimum of 6 CFM @ 90 PSI is required
for best performance. Less available CFM will negatively affect the performance of the Sander
and may overwork the compressor.
SPECIFICATIONS
Sanding Disc Size & Type:
6” [152mm] PSA Type
RPM:
10,000 free speed
Air Consumption:
6 CFM [170 L/min] @90 PSI [6.2 bar]
Inlet thread size:
1/4” FNPT
Replacement Backing Pad:
6” PSA or Hook and Loop with 5/16”-24 threaded post
(Minimum 10,000 RPM rating)
