Rockwell ShopSeries RC4700, Руководство пользователя

Страница: 10 / 32

ANGLE GRINDER ENG
10
3. If the grinder is used on soft metals such as
aluminum, the wheel will soon clog and will have to be
changed.
4. At all times, let the grinder do the work, do not force it
or apply excessive pressure to the wheel/disc.
5 If cutting a slot ensures that the cutter is kept aligned
with the slot, twisting the cutter may cause the disc to
shatter. If cutting through thin sheet only allow material,
excessive penetration can increase the chance of
causing damage.
6. If cutting stone or brick, it is advisable to use a dust
extractor.
MAINTAIN TOOLS wITh CARE
Remove the plug from the socket before carrying out
any adjustment, servicing or maintenance.
Keep tools sharp and clean for better and safer
performance. Follow instructions for lubricating and
changing accessories. Inspect tool cords periodically
and if damaged, have repaired by authorized service
facility.
Your power tool requires no additional lubrication or
maintenance. There are no user serviceable parts in
your power tool. Never use water or chemical cleaners
to clean your power tool. Wipe clean with a dry cloth.
Always store your power tool in a dry place. Keep the
motor ventilation slots clean. Keep all working controls
free of dust.
If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
TROUbLEShOOTING
Although your new angle grinder is really very simple to
operate, if you do experience problems, please check
the following:
1. If your grinder will not operate check the power at the
main plug.
2. If your grinder wheel wobbles or vibrates, check that
outer flange is tight, check that the wheel is correctly
located on the flange plate.
3. If there is any evidence that the wheel is damaged do
not use as the damaged wheel may disintegrate, remove
it and replace with a new wheel. Dispose of old wheels
sensibly.
4. If working on aluminum or a similar soft alloy, the
wheel will soon become clogged and will not grind
effectively.
5. If a fault can not be rectified, return the tool to an
authorized dealer or its service agent for repair.
wARRANTy
LIMITED 30-DAy ExChANGE POLICy
During the first 30 days after date of purchase, you may
exchange a tool which does not work properly due to defects in
materials or workmanship by returning the power tool to the re-
tailer where it was purchased. To receive a replacement power
tool, you must present a dated proof of purchase and return all
original equipment packaged with the original product.
LIMITED TwO yEAR wARRANTy
The manufacturer warrants that, for a period of 2 years from the
date of purchase, this product shall be free of defects in materi-
als and workmanship. We will repair or replace, at our option,
this tool during the warranty period, and we may require that
the tool be sent postage prepaid to an approved service center
with all original equipment and a dated proof of purchase. Any
replacement or repaired power tool will only be covered by the
limited warranty for the balance of the warranty period from the
date of the original purchase.
whAT IS NOT COvERED
This warranty applies only to the original purchaser at retail and
is not transferable.
This warranty does NOT cover service or replacement of parts
resulting from normal wear.
This warranty does NOT cover accessories or battery packs.
This warranty does NOT cover malfunction, failure or defects
due to:
a) abnormal use, abuse, neglect, or use not in accordance with
the operations manual
b) damage resulting from accidents, drops or mishandling of
the tool
c) alteration or repairs by other than approved service centers
d) commercial or rental use.
The manufacturer makes no warranties, representations or
promises as to the quality or performance of its power tools
other than those specifically stated in this warranty.
FOR SERvICE
Contact our toll-free consumer service line at 866-514-7625
to receive a replacement tool or to be directed to an approved
service center. When you make a warranty claim or send the
tool for warranty service, you must also include a dated proof