Rockwell RS2111, Руководство пользователя

Страница: 9 / 11

9
CORDLESS IMPACT DRIVER EN
LED lighting increases visibility-great for dark
or enclosed area. LED is also a battery capacity
indicator.
ATTENTION! The LED Light could not face to eyes
directly.
8. DISPOSAL OF AN EXHAuSTED BATTERy PACk
Li-Ion
To preserve natural resources, please recycle
or dispose of the battery pack properly. This
battery pack contains Lithium batteries.
Consult your local waste authority for information
regarding available recycling and/or disposal options.
Discharge your battery pack by operating your drill,
then remove the battery pack from the drill housing
and cover the battery pack connections with heavy-
duty adhesive tape to prevent short circuit and energy
discharge. Do not attempt to open or remove any of
the components.
9. OVERLOAD PROTECTION
When overloaded, the motor comes to a stop. Release
the on/off button, and the machine will restart
immediately.
10. TEMPERATuRE DEPENDENT OVERLOAD PROTECTION
When using as intended for the power tool cannot be
subject to overload. When the load is too high or the
allowable battery temperature of 75°C is exceeded,
the electronic control switches off the power tool until
the temperature is in the optimum temperature range
again.
11. PROTECTION AGAINST DEEP DISCHARGING
The Li-ion battery is protected against deep
discharging by the “Discharging Protection System”.
When the battery is empty, the machine is switched
off by means of a protective circuit: The inserted tool
no longer rotates.
PROBLEM SOLuTION
I CANNOT FIT THE BATTERy INTO THE BATTERy
CHARGER. wHy?
a) Check if the charger and the battery pack are
specifically designed for working together.
b) The battery can be inserted into the charger only
in one direction. Turn the battery around until it
can be inserted into the slot, the indicator light
should be red when the battery is charging.
REASONS FOR DIFFERENT
CHARGING TIMES
The charging time can be affected by many reasons
which are not defects in your product.
If the battery pack is very hot it will not re-charge
because the internal temperature safety cutout will
prevent it. If the battery pack is very hot you must
remove your battery pack from the charger and allow
your battery pack to cool first to ambient temperature
and then recharging can be started.
MAINTENANCE
Your power tool requires no additional lubrication or
maintenance.
There are no user serviceable parts in your power
tool. Never use water or chemical cleaners to clean
your power tool. Wipe clean with a dry cloth. Always
store your power tool in a dry place. Keep the motor
ventilation slots clean. Keep all working controls free
of dust. Occasionally you may see sparks through the
ventilation slots. This is normal and will not damage
your power tool.