LBI-39152
SPECIFICATIONS*
2
ASSEMBLY DIAGRAMS..............................................................................................................................13
PARTS LISTS..................................................................................................................................................15
IC DATA ..........................................................................................................................................................17
OUTLINE DIAGRAM....................................................................................................................................19
SCHEMATIC DIAGRAMS ...........................................................................................................................21
FIGURES AND TABLES
Figure 1 - RS-232 Interface Front Panel ....................................................................................................3
Figure 2 - Rockwell Modem Interface Card Front Panel ...........................................................................4
Figure 3 - Rockwell Modem Interface Card Block Diagram......................................................................7
Figure 4 - RMIC Jumper Locations............................................................................................................10
Figure 5 - RMIC DIP Switch S1 ................................................................................................................11
Figure 6 - RMIC RS-232 Receive Mod (PWB top) ...................................................................................12
Figure 7 - RMIC RS-232 Receive Mod (PWB bottom) .............................................................................12
Table 1 - R96FT Hardware Circuits...........................................................................................................8
Table 2 - Digital Interface Characteristics..................................................................................................9
Table 3 - Analog Interface Characteristics .................................................................................................9
SPECIFICATIONS*
ITEM
SPECIFICATION
RS-232 INTERFACE CARD
DIMENSIONS (H x L)
100 mm x 220 mm
CONNECTIONS
96 pin DIN connector mating to VME backplane interface.
ROCKWELL MODEM INTERFACE CARD
POWER
+5 Vdc
±
5%, 1A max.
+12 Vdc
±
5%, 250mA max.
-12 Vdc
±
5%, 250 mA max.
DIMENSIONS (H x L)
100 mm x 220 mm
CONNECTIONS
96 pin DIN connector mating to VME backplane interface.
ROCKWELL MODEM (RTYUA 92101/1)
POWER
+5 Vdc
±
5%; 300 mA typical
+12 Vdc
±
5%; 20 mA typical
-12 Vdc
±
5%; 50 mA typical
TEMPERATURE
Operating
Storage
0
°
C to + 60
°
C (32 to 140
°
F)
-40
°
C to +80
°
C (-40 to 176
°
F)
RELATIVE HUMIDITY
Up to 90% noncondensing.
DIMENSIONS (W x L x H)
100 mm x 82 mm x 7.6 mm above and 3.3 mm below.
Copyright
September 1995, Ericsson Inc.
* These specifications are intended for use during servicing. Refer to appropriate Specification Sheet for the complete
specification.
