LBI-39152
PARTS LIST
16
SYMBOL
PART
NUMBER
DESCRIPTION
X9
RPV 380 10/03
Pin strip header.
------------ FUSE HOLDERS --------
XF1
NFN 102 04
Holder, Fuse.
XF2
NFN 102 04
Holder, Fuse.
XF3
NFN 102 04
Holder, Fuse.
----------- MISCELLANEOUS -------
2
TVA 117 2225 R2
Printed wiring board.
3
SXA 120 4174/3
Modem Interface Front Panel.
4
NTM 201 1079
Hardware Kit.
6
RNY 101 01/4
Keying Plug.
MODEM
RYTUA 921 01/1
Modem, 9600 baud; sim to Rockwell
Modem R96FT with DIP connector.
PRODUCTION CHANGES
Changes in the equipment to improve performance or simplify circuits are
identified by a "Revision Letter," which is stamped after the model number of
the unit. The revision stamped on the unit includes all previous revisions.
Refer to the parts list for the descriptions of the parts affected by these
revisions.
Rev. R2A - ROA 117 2247/1
Connectors X1 and X2 changed to improve installation of
Rockwell Modem.
X1 and X2 changed from RNV 403 105/031 to RNV 403
843/031.
RS-232 INTERFACE CARD
131 32-ROA 117 2247/2
Revision: B
SYMBOL
PART
NUMBER
DESCRIPTION
--------------- RESISTORS -----------
R43
REP 264 001/0
Resistor, 0 Ohm, 0207.
R44
REP 264 001/0
Resistor, 0 Ohm, 0207.
R45
REP 264 001/0
Resistor, 0 Ohm, 0207.
------------- CONNECTORS ---------
X5
RPV 403 209/102
Connector, 96 contact.
----------- MISCELLANEOUS -------
2
TVA 117 2225 R2
Printed wiring board.
3
SXA 120 4174/4
RS-232 Interface Front Panel.
4
NTM 201 1079
Hardware Kit.
PRODUCTION CHANGES
Changes in the equipment to improve performance or simplify circuits are
identified by a "Revision Letter," which is stamped after the model number of
the unit. The revision stamped on the unit includes all previous revisions.
Refer to the parts list for the descriptions of the parts affected by these
revisions.
Rev. R2A - ROA 117 2247/2
Jumper R45 added to connect CTS to RTS. (In revision R1A, a
short piece of 19A700134P10 DA wire was installed between
X5-B21 and X5-B22.)
Connector X5, which was inadvertently omitted, was added to
the parts list.
