Rockwell RD3110K.1, Руководство пользователя

Страница: 13 / 16

13
130W MINI DRILL EN
USING ACCESSORIES
The chart below lists the description, use speed and scope for some of the small articles supplied together with
the tool by category. To achieve best performance of the tool, it is strongly recommended that you read it prior to
operation, failure to adhere to this may cause accessories to fail.
NOTE: ALWAYS Wear eye protection Insert the shaft FULLY into the collet. Use ONLY up to the speeds stated
below.
PICTURE DESCRIPTION SPEED FOR USE ON
Grinder bits
Various head styles,
on shafts
Full speed Metal
Mild steel
Diamond Bits
Various head styles
Full speed Wood Zinc
Plastic Nickel
Copper Mild steel
Wool Wheel
Mounted to screw drill
Half speed Metal
Mild steel
Sanding/Cutting wheels
Mounted to cutting wheel
fixture
NOTE:
DO NOT over tighten screw
Half speed Metal
Mild steel
Wood
Sanding Roll
Mounted on hold for rubber
wheel
Full speed Metal
Mild steel
NOTE:
To fit the sanding roll, firstly loosen the small screw on top of the hole for rubber
wheel, this will allow the rubber to relax. Slide the sanding roll onto the holder.
To secure, simply tighten the screw and the rubber roll will swell, gripping the sanding
drum.