Micro800 Non-isolated Unipolar Analog Output Plug-in Module
5
Publication
2080-WD004A-EN-P - September 2010
Wire the Module
Follow the pinout diagram to wire your plug-in module.
8-Pin Female Terminal Block
Insert Module into Controller
Follow the instructions to insert and secure the plug-in module to the
controller.
1.
Position the plug-in module with the terminal block facing the front
of the controller as shown.
2.
Snap the module into the module bay.
3.
Using a screwdriver, tighten the 10…12 mm (0.39…0.47 in.) M3 self
tapping screw to torque specifications.
1
2
3
4
1
2
3
4
B
A
Back
Front
40514
(View into terminal block)
Pin A1 COM
Pin B1
VO-0
Pin A2 COM
Pin B2
CO-0
Pin A3 COM
Pin B3
VO-1
Pin A4 COM
Pin B4
CO-1
44015
