background image

Publication 6300B-IN001C-EN-P - February 2021 | Supersedes Publication 6300B-IN001B-EN-P-October 2020

Copyright © 2021 Rockwell Automation, Inc. All rights reserved. Printed in Italy.

Vendor Code 80460002.02

DIR 10005614692 (Version 02)

Allen-Bradley, expanding human possibility, Rockwell Automation, and VersaView are trademarks of Rockwell Automation, Inc.
Microsoft and Windows are trademarks of Microsoft Corporation.
Trademarks not belonging to Rockwell Automation are property of their respective companies.

*PN-592308*

PN-592308

Battery Removal

Waste Electrical and Electronic Equipment (WEEE)

Rockwell Automation maintains current product environmental information on its website at 

rok.auto/pec

.

Your comments help us serve your documentation needs better. If you have any suggestions on how to improve our content, complete the form

 

at

 

rok.auto/docfeedback

.

 

For technical support, visit 

rok.auto/support

.

Rockwell Otomasyon Ticaret A.

Ş

. Kar Plaza 

İş

 Merkezi E Blok Kat:6 34752  

İ

çerenkÖy, 

İ

stanbul, Tel: +90 (216) 5698400 EEE YÖnetmeli

ğ

ine Uygundur

This computer contains a sealed lithium battery that could need replacement during the life of the computer. For instructions to remove and replace the 

battery, refer to publications 

6300B-UM001

VersaView 6300B Book Mount Box PCs and Book Mount Thin Clients User Manual. At the end of its life, collect 

the battery contained in this computer separately from any unsorted municipal waste.

At the end of life, this equipment should be collected separately from any unsorted municipal waste.

Содержание Allen-Bradley VersaView 6300B









Отзывы: