Rockwell Automation PowerFlex 755 Drive, Руководство пользователя

Страница: 26 / 232

3-4 Configuring the Adapter
PowerFlex® 755 Drive Embedded EtherNet/IP Adapter User Manual
Publication 750COM-UM001A-EN-P
6. In the BOOTP Request History list, either double-click the adapter’s
Ethernet Address (MAC) noted in Step 1A or Step 1B, or click New
in the Relation List. The New Entry dialog box (
Figure 3.4 ) appears.
In the first case, the Ethernet Address (MAC) is automatically
entered. In the latter case, you must manually enter it.
Figure 3.4 New Entry Dialog Box
7. Edit the following:
8. Click OK to apply the settings. The adapter appears in the Relation
List ( Figure 3.5 ) with the new settings.
Figure 3.5 BOOTP Server Window with Adapter in the Relation List
9. To assign this configuration to the adapter permanently, select the
device in the Relation List and click Disable BOOTP/DHCP.
When power is cycled on the adapter, it will use the configuration
you assigned it and not issue new BOOTP requests.
10. To save the Relation List, select File > Save.
Box Type
IP Address
(1)
(1)
For definitions of these terms, refer to the Glossary .
A unique IP address for the adapter
Host Name Optional
Description Optional
TIP: To enable BOOTP for an embedded adapter that has had
BOOTP disabled, first select the adapter in the Relation List, then
click Enable BOOTP, and finally reset the adapter or power cycle
the drive.