Rockwell Automation Guardmaster 440R-ENETR, Руководство пользователя, Страница: 51 / 86

Rockwell Automation Publication 440R-UM009C-EN-P - July 2019 51
AOP Controller Tags Chapter 6
EM Tags
Table 10 lists the tags used by the EM expansion module.
Table 10 - EM Relay Tags (Tag name prefix: ENETRname:I.Relayx_GSR_EM.)
Name Data Type Definition
SingleWireSafetyIn BOOL Single Wire Safety Input Status – Indicates whether the Single Wire Safety input (L12) is ON or OFF.
0 = The Single Wire Safety input signal is OFF.
1 = The Single Wire Safety input signal is ON.
SafetyOutput BOOL Safety Output Status – Indicates whether the safety output channels are ON or OFF.
0 = The safety output channels are OFF.
1 = The safety input channels are ON.
Recoverable_Fault BOOL Recoverable Fault Status – Toggles ON (1) for one scan when the EM has detected an unexpected operation. Toggles back to OFF (0),
when the unexpected operation status goes to ON (1).
0 = No fault
1 = Fault
NonRecoverable_Fault BOOL Nonrecoverable Fault Status – Toggles ON (1) for one scan when the safety relay has detected unexpected internal operation or failed
a pulse check. Toggles back to OFF (0), when the nonrecoverable fault tags are assigned a value. See
NonRecoverableFault_A and
NonRecoverableFault_B for details.
0 = No fault
1 = Fault
NonRecoverableFault_A SINT Nonrecoverable Fault Processor A – Indicates that Safety Processor A has recorded a nonrecoverable fault. See Table 12 on page 53 for
a list of nonrecoverable fault codes.
NonRecoverableFault_B SINT Nonrecoverable Fault Processor B – Indicates that Safety Processor B has recorded a nonrecoverable fault. See Table 12 on page 53 for
a list of nonrecoverable fault codes.