manualshive.com logo in svg

Rockwell Automation Allen-Bradley PowerFlex SCR, Руководство пользователя

Поделиться
Скачать
Rockwell Automation Allen-Bradley PowerFlex SCR Скачать руководство пользователя страница 33

Installation/Wiring

1-19

PowerFlex SCR Bus Supply User Manual

Publication 20S-UM001G-EN-P

 

 

 

CE Conformity

Conformity with the Low Voltage (LV) Directive and Electromagnetic 
Compatibility (EMC) Directive has been demonstrated using harmonized 
European Norm (EN) standards published in the Official Journal of the 
European Communities. The PowerFlex SCR Bus Supply complies with the 
EN standards listed below when installed according to the User Manual.

CE Declarations of Conformity are available online at: 

http://www.ab.com/certification/ce/docs

 

Low Voltage Directive (73/23/EEC)

•

EN50178 Electronic equipment for use in power installations

EMC Directive (89/336/EEC)

•

EN61800-3 Adjustable speed electrical power drive systems Part 3: 
EMC product standard including specific test methods.

Harmonic Emissions

Electronic converters such as the Bus Supply can cause conducted low 
frequency disturbances (harmonic emissions) to the supply network. The 
mandatory three-phase AC line reactors will substantially reduce harmonic 
currents produced by the Bus Supply. However, the magnitude of the 
harmonic currents and resulting harmonic voltages depends upon the 
network impedance at the point where the unit is connected to the network. 
Currently there are no mandatory harmonic emission limits related to CE 
compliance for equipment connected to private power networks. Upon 
request, Rockwell Automation can provide information regarding harmonic 
emissions from the SCR Bus Supply.

General Notes

•

The DC bus cable to the inverter(s) should be kept as short as possible to 
avoid electromagnetic emission and capacitive currents. Therefore the 
inverter(s) should be located in the same cabinet as the Bus Supply or 
next to the cabinet with the Bus Supply. If the connection leads between 
DC bus and inverter(s) are leaving the cabinet, shielded cables must be 
used.

•

Use of line filters in non-solid grounded systems is not recommended.

•

The PowerFlex SCR Bus Supply with external Line Reactor and HF 
filter satisfies CE EMC emission limits for the industrial environment. If 
used in a residential or domestic environment it

 

may cause radio 

interference. The user is required to take measures to prevent 
interference, in addition to the essential requirements for CE compliance 
listed below, if necessary.

Содержание Allen-Bradley PowerFlex SCR





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды