Rockwell Automation Allen-Bradley PowerFlex 7000, Руководство пользователя

Страница: 111 / 434

Rockwell Automation Publication 7000L-UM301F-EN-P - March 2020 111
Operator Interface Chapter 3
Press the [cursor up] or [cursor down] keys to select the desired group, (i.e.
reverse video the group name). Press the [enter] key. The SELECT screen
(
Figure 95 ) is displayed showing the members of the selected group. The name of
the selected group currently being displayed is shown after the screen name, i.e.
Motor Ratings. Again using the [cursor up] or [cursor down] keys, and if
required the [F8] and [F9] keys to change the page, select the desired tag. Press
the [enter] key and the selected tag will be used to continue the operation for
which the selection process was being used.
Figure 94 - Selecting a Group
Figure 95 - Selecting a Member of a Group
From the SELECT GROUP screen ( Figure 94 ), the tag can also be selected via
its name by pressing the [F7] key.
Via Name
When you know the name of the tag that you wish to select but do not know
what group it belongs to or are unsure of the full name, this method of selection
may be appropriate.
Selecting via a name is initiated from the SELECT GROUP screen ( Figure 94 )
by pressing the [F7] key. This displays the SELECT LETTER screen shown in
Figure 96 .