Rockwell Automation Allen-Bradley MicroLogix 1400 Series, Руководство пользователя

Страница: 8 / 48

8 Rockwell Automation Publication 1766-UM002E-EN-P - June 2019
Chapter 1 MicroLogix 1400 Embedded Web Server
Connect the MicroLogix
1400 controller to the
Network
2. Connect the module to
the network.
Connect the MicroLogix 1400 controller to the Ethernet network. The RJ-45
connector is on the left-hand side of the module.
3. Obtain an IP address. By default, the MicroLogix 1400 controller is BOOTP enabled. If you connect
the MicroLogix 1400 controller to a network that has a BOOTP server, that
server will assign an IP address to the MicroLogix 1400 controller and the LCD
screen of the MicroLogix 1400 controller will display BOOTP IP address.
If your network does not have a BOOTP server, use one of the methods
described in the MicroLogix 1400 Programmable Controllers User Manual
1766-UM001 to assign an IP address to the MicroLogix 1400 controller.
44592
For more information, see
MicroLogix1400 Programmable
Controllers User Manual
1766-UM001 .