Rockwell Automation Allen-Bradley Kinetix 2000, Руководство по миграции

Страница: 29 / 76

Rockwell Automation Publication 2093-AP001A-EN-P - May 2014
29
Servo Drive and System Comparisons Chapter 2
While circuit breakers offer some convenience, there are limitations for their use.
Circuit breakers do not handle high current inrush as well as fuses.
Make sure the selected components are properly coordinated and meet acceptable
codes including any requirements for branch circuit protection. Evaluation of the
short-circuit available current is critical and must be kept below the short-circuit
current rating of the circuit breaker.
Kinetix 2000 Servo Drive Main and Control Input Power Fuse Specifications
Use class CC, J, L, or R fuses, with current rating as indicated in the table below.
The following fuse examples and Allen-Bradley circuit breakers are
recommended for use with integrated axis modules (2093-AC05-MPx) when the
Line Interface Module (LIM) is not used.
Table 3 - Main and Control Input Power Fuse Specifications
Kinetix 5500 Servo Drive Main Input Power Fuse and Circuit Breaker Specifications
The Kinetix 5500 servo drive fuse and circuit breaker selection are dependent on
input power configurations.
Table 4 - Standalone Drive Systems Fuse Selection (Bussmann Part No.)
IMPORTANT
UL has not approved circuit breakers for use as branch circuit protection for
Kinetix 5500 servo drive systems.
Kinetix 2000
Servo Drive
Cat. No. Main Input Power Control Input Power
Main Input Fuse Circuit Breaker
1492 Series
(1)
Circuit Breaker
140M Series
(1)
Fuse
(2)
Circuit Breaker
1492 Series
(1)
2093-AC05-MP1
170...264V AC
three-phase
KTK-R-20 (20A) 1492-CB3H300
140M-F8E-C16
FNQ-R-10 (10A)
or
KTK-R-5 (5A)
1492-CB2H060
2093-AC05-MP2
2093-AC05-MP5
2093-AC05-MP1
170...264V AC
single-phase
N/A 2093-AC05-MP2
2093-AC05-MP5
(1) When using Bulletin 1492 or 140M circuit protection devices, the maximum short circuit current available from the source is limited to 5000 A.
(2) Fuse selection for control power is appropriate for an eight-axis system with the specified IAM.
Kinetix 5500 Servo Drive Cat. No. Three-phase Single-phase
2198-H003-ERSx KTK-R-3 KTK-R-2
2198-H008-ERSx KTK-R-7 KTK-R-5
2198-H015-ERSx KTK-R-15 KTK-R-10
2198-H025-ERSx KTK-R-20
N/A 2198-H040-ERSx KTK-R-25
2198-H070-ERSx LPJ-35SP