Rockwell Automation Allen-Bradley Guardmaster 440G-LZS21SP Series Скачать руководство пользователя страница 13

Страница: 13 / 64

Rockwell Automation Publication 440G-UM001C-EN-P - June 2019

Chapter

Installation

General Considerations

Installation must be in accordance with the present manual and implemented

by qualified personnel exclusively. The 440G-LZ guard locking safety switch is

intended to be part of the safety-related control system of a machine.

Correct Use

Review the following requirements and guidelines for proper use of the safety

switch in order to achieve optimal performance.

• The 440G-LZ guard locking safety switch is designed for use on small-

and medium-sized guards that are engineered to be rigid without sag and

allow partial body access to the safeguarded area.

• The switch is not to be used as a mechanical stop. Check that a separate

door stop is used.

• Use in applications where the alignment tolerance falls within the stated

specification (± 2.5 mm [0.10 in.] in X, Y, Z directions). A separately

mounted latch (for example, magnetic or mechanical) is recommended

to maintain proper alignment of the actuator. The locking bolt must be

free to enter and withdraw from the hole in the actuator without

binding.

• This switch can be used on guards that do not require escape,

emergency, or remote releases.

• Use appropriate screws, bolts, or nuts that are fitted by tools to mount

the switch and actuators to avoid tampering.

• Do not over torque the mounting hardware.
• The locking bolt must never be extended mechanically. Only extend the

bolt electrically. These basic connections are required:
– Pin 2 (brown wire) must be connected to 24V DC
– Pin 7 (blue wire) must be connected to 0V (GND)
– Pin 3 (green wire) is the lock command (0 or 24V DC). See

Lock

Command on page 25

for description of lock command for PTR and

PTL type switches.

• Adjacent switches must be separated by a minimum distance of 200 m

in.), see

Pair Proximity on page 18

ATTENTION:

Before installation, a thorough risk assessment must be

performed to determine whether the specifications of this device are

suitable for all foreseeable operational and environmental characteristics of
the application.

Содержание Allen-Bradley Guardmaster 440G-LZS21SP Series

































































Результаты поиска

Содержание Allen-Bradley Guardmaster 440G-LZS21SP Series

Отзывы:

Похожие инструкции для Allen-Bradley Guardmaster 440G-LZS21SP Series

Бренды по названию

Популярные бренды

Rockwell Automation Allen-Bradley Guardmaster 440G-LZS21SP Series, Руководство пользователя

Результаты поиска

Содержание Allen-Bradley Guardmaster 440G-LZS21SP Series

Отзывы:

Похожие инструкции для Allen-Bradley Guardmaster 440G-LZS21SP Series

Бренды по названию

Популярные бренды