Rockwell Automation Allen-Bradley 6300V-RVLDV-RX, Руководство по установке, Страница: 7 / 8

Rockwell Automation Publication 6300V-IN004A-EN-P - November 2022 7
Remote Video Link Receiver for 6300B Box PCs and 6300T Box Thin Clients Installation Instructions
Attach the I/O Cables and Power Cords
Figure 4 - I/O Cable Connection
1. Attach the RVL cable, DVI-D Output, and USB 2.0 cable to the I/O ports at the front of your RCL receiver. See Table 1 on page 5 to identify I/O port locations.
2. Connect the free end of the I/O cables and power cords to your hardware as shown in Figure 4 .
3. Connect the free end of the power cords to your wall outlet.

Once power is supplied to your RVL receiver and other hardware, light-emitting diode (LED) status indicators will illuminate.
Table 3 - LED Status Indicators
Note No. Description
1 Video Link
2 Link
3 Run
4 Power
DVI-D USB 24V DC
RVL IN
USB USB
DVI-D OUT
POWER
24V DC
+ -
RVL OUT
USB DVI-D IN
POWER
24V DC
- +
DVI-D OUT
E1
E2
24V DC
RVL OUT
E1
DVI-D
USB 24V DC
RVL IN
USB USB
DVI-D OUT
POWER
24V DC
+ -
E2
Industrial Monitor > RVL Receiver > Industrial PC with Integrated Transmitter
RVL (Cat. 5E/Cat. 6 A connection) cable, 100 m (328 ft) maximum length
U
SB
2.
0 cab
le
DV
I c
ab
le
Industrial Monitor > RVL Receiver > RVL Transmitter > Industrial PC
RVL (Cat. 5E/Cat. 6 A connection) cable, 100 m (328 ft) maximum length
Industrial Monitor
RVL Receiver
Industrial PC
RVL Transmitter
Industrial PC with Integrated Transmitter
Industrial Monitor
RVL Receiver
DV
I c
ab
le
U
SB
2.
0 cab
le
Ground
Ground
Ground
Ground
Ground
Specified
Input Power
24V DC
24V DC
24V DC
Ground
Ground
DV
I c
ab
le
U
SB
2.
0 cab
le
24V DC
24V DC
2
LINK
RUN
PWR
VIDEO
1
4
2
3
View of Unit from Front