Rockwell Automation Allen-Bradley 1790P-T0W6, Руководство по установке

Страница: 2 / 20

2
Publication 1790-IN009B-EN-P - April 2003
Important User Information
Because of the variety of uses for the products described in
this publication, those responsible for the application and use
of these products must satisfy themselves that all necessary
steps have been taken to assure that each application and use
meets all performance and safety requirements, including any
applicable laws, regulations, codes and standards. In no event
will Rockwell Automation be responsible or liable for indirect
or consequential damage resulting from the use or application
of these products.
Any illustrations, charts, sample programs, and layout
examples shown in this publication are intended solely for
purposes of example. Since there are many variables and
requirements associated with any particular installation,
Rockwell Automation does not assume responsibility or
liability (to include intellectual property liability) for actual use
based upon the examples shown in this publication.
Allen-Bradley publication SGI-1.1, Safety Guidelines for the
Application, Installation and Maintenance of Solid-State
Control
(available from your local Rockwell Automation
office), describes some important differences between
solid-state equipment and electromechanical devices that
should be taken into consideration when applying products
such as those described in this publication.
Reproduction of the contents of this copyrighted publication,
in whole or part, without written permission of Rockwell
Automation, is prohibited.
Throughout this publication, notes may be used to make you
aware of safety considerations. The following annotations and
their accompanying statements help you to identify a potential
hazard, avoid a potential hazard, and recognize the
consequences of a potential hazard