Rockwell Automation Allen-Bradley 1606-XLE240E, Справочное руководство

Страница: 19 / 38

Rockwell Automation Publication 1606-RM101A-EN-P - July 2020 19
Protection Features
Safety Features
Attributes Values Notes
Output protection
Electronically protected against overload, no-load, and short-circuits. If there is a
protection event, audible noise may occur.
Output overvoltage
protection
30.5V DC typ, 32V DC max
If there is an internal power supply anomaly, a redundant
circuit limits the max output voltage. The output shuts down
and automatically attempts to restart.
Degree of protection IP 20 EN/IEC 60529
Penetration protection > 4 mm (0.16 in.) For example, screws, and small parts
Over-temperature
protection
Yes
Output shuts down and the power supply automatically
restarts. The temperature sensor is installed on critical
components inside the unit and turns off the unit in safety
critical situations. Safety critical situations can include
when derating requirements are not observed, ambient
temperature is too high, ventilation is obstructed, or the
derating requirements for a mounting orientation are not
followed. There is no correlation between the operating
temperature and turn-off temperature since this is
dependent on input voltage, load, and installation methods.
Input transient protection MOV (Metal Oxide Varistor)
For protection values, see Electromagnetic Compatibility on
page 17 .
Internal input fuse Included
Slow-blow high-braking capacity fuse that is not user
replaceable.
Attributes Values Notes
Input / output
separation
Double or reinforced galvanic isolation
SELV IEC/EN 60950-1
PELV IEC/EN 60204-1, EN 62477-1, IEC 60364-4-41
Class of
protection
I PE (Protective Earth) connection required
Isolation
resistance
> 500 MΩ At delivered condition between input and output, measured with 500V DC
> 500 MΩ At delivered condition between input and PE, measured with 500V DC
> 500 MΩ At delivered condition between output and PE, measured with 500V DC
> 500 MΩ
At delivered condition between output and DC OK contacts, measured with
500V DC
PE resistance < 0.1 Ω
Resistance between PE terminal and the housing in the area of the DIN rail
mounting bracket.
Touch current
(leakage
current)
0.14 mA typ / 0.36 mA typ At 100V AC, 50 Hz, TN-,TT-mains / IT-mains
0.20 mA typ / 0.50 mA typ At 120V AC, 60 Hz, TN-,TT-mains / IT-mains
0.33 mA typ / 0.86 mA typ At 230V AC, 50 Hz, TN-,TT-mains / IT-mains
0.18 mA max / 0.43 mA max At 110V AC, 50 Hz, TN-,TT-mains / IT-mains
0.26 mA max / 0.61 mA max At 132V AC, 60 Hz, TN-,TT-mains / IT-mains
0.44 mA max / 1.05 mA max At 264V AC, 50 Hz, TN-,TT-mains / IT-mains